manualshive.com logo in svg

Digital Projection M-Vision Laser 21000 WU, Important Information Manual, Page: 3 / 29

Share
Download
Digital Projection M-Vision Laser 21000 WU Important Information Manual Download Page 3

Digital Projection 

M-Vision Laser 21000 WU

Rev A November 2018

Page 3

Important Information

Super High Brightness Digital Video Projector

Important Information

Full information about operating, connecting and setting up the projector can be found in the User 

Manual, located on the CD.

Contents

Symbols used in the User Manual

 ...............................................................................................4

Electrical and physical specifications

 ........................................................................................5

Laser precautions

 .............................................................................................................................5

Product labels

 ....................................................................................................................................6

Label locations

 ...............................................................................................................................7

Location of laser aperture

 ..............................................................................................................8

Interlock switches

 ............................................................................................................................8

General precautions

 ........................................................................................................................9

Installation precautions

 ................................................................................................................10

Light hazard warning

 .....................................................................................................................11

Light hazard labels used on the body of the projector

 ............................................................12

Operation and configuration precautions

 ...............................................................................13

Compliance with international standards

 ...............................................................................13

RF Interference

 .............................................................................................................................13

Noise

 .............................................................................................................................................13

European Waste Electrical and Electronic Equipment (WEEE) Directive

 ..............................13

Basic Operation Instructions

 ......................................................................................................14

Positioning the screen and projector

 .........................................................................................14

Stacking instructions

 ...................................................................................................................15

Connecting the power supply

 .....................................................................................................18

Switching the projector on

 ..........................................................................................................18

Switching the projector off

 ..........................................................................................................19

Selecting an input signal

 .............................................................................................................19

Selecting a test pattern

 ................................................................................................................19

Adjusting the lens

 ........................................................................................................................20

Adjusting the image

 .....................................................................................................................20

Inserting a new lens

 .....................................................................................................................21

Removing the lens

 .......................................................................................................................22

Fitting a lens hood

 .......................................................................................................................23

Control Panel Reference

...............................................................................................................24

Projector indicators

 .....................................................................................................................26

Remote Control Reference

 ..........................................................................................................27

Summary of Contents for M-Vision Laser 21000 WU






























Reviews:

No comments