Digital Projection
M-Vision Laser 21000 WU
Rev A November 2018
Page 21
Important Information
Inserting a new lens
Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
The lens is shipped separately.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens fitted.
1. Remove the lens cover.
2. Insert the lens, keeping the connector in upright
position.
3. Rotate the lens clockwise until it clicks into
place.
