Digital Projection
E-Vision Laser 5000 Series
Rev A January 2018
Page 17
Important Information
Selecting an input signal
If more than one input source is connected, select the input you want to display. Press the
Source
button on the control panel and use the
UP ▲
and
DOWN
▼ arrow buttons to scroll through the list of
inputs:
•
HDMI 1
•
HDMI 2
•
HDMI 3 / MHL
•
Computer VGA : analog RGB
•
Composite Video
•
HDBaseT
Selecting a test pattern
1. Press the
MENU
button to open the OSD.
2. Press the
LEFT
◄ and
RIGHT
► arrow buttons to navigate to the
Settings 1
menu.
3. Press the
UP
▲ and
DOWN
▼ arrow buttons to move to the
Advanced 2
submenu and then
press
(
ENTER
) to open the submenu. Once inside, press
UP
▲ and
DOWN
▼ to highlight
Test Pattern
.
4. Use the
LEFT
◄ and
RIGHT
► arrow buttons to cycle through the available test patterns.
Adjusting the image
Orientation
•
This can be set from the
Setttings 1
menu.
Highlight
Projection
and choose from
Normal
,
Rear
,
Ceiling
and
Rear+Ceiling
.
Keystone
To adjust keystone, press the
Keystone
button on the remote control to open the
Keystone
menu,
and then use the arrow buttons for vertical or horizontal keystone corrections.
Picture
•
Settings such as
Gamma
,
Brightness
,
Contrast
and
Sharpness
can be set from the
Image
menu.
