Digital Projection
E-Vision Laser 5000 Series
Rev A January 2018
Page 11
Important Information
Installation precautions
Connect the LAN cable only to a computer LAN connection. Other similar connectors
may have a dangerously high voltage source.
The projector must be installed only by suitably qualified personnel, in accordance with
local building codes.
The projector should be installed as close to the power outlet as possible.
The power connection should be easily accessible, so that it can be disconnected in an
emergency.
There is no limit on tilt angle.
Allow at least 50cm (19.7in) of space between the ventilation outlets and any wall, and
30cm (11.8in) on all other sides.
For portrait installation, a customized stand is required to be attached to the projector.
See
Reference drawings for customized stand - portrait mode
in the user manual.
Do not install the projector close to anything that might be affected by its operational
heat, for instance, polystyrene ceiling tiles, curtains etc.
Minimum 500 mm
(19.69 inch)
Minimum 500 mm
(19.69 inch)
Minimum 500 mm
(19.69 inch)
Minimum 100 mm
(3.94 inch)
Minimum 500 mm
(19.69 inch)
Minimum 300 mm
(11.81 inch)