page 37
Digital Projection E-Vision 6800 3D Series
Operating Guide
USING THE PROJECTOR
Rev A January 2015
3D menu
Use this menu to enable, disable and set up 3D input, as follows:
•
3D Format
—
Off
,
Auto
,
Side by Side
,
T
op and Bottom
and
Frame Sequential
.
•
DLP Link
—
On
(if you are using 3D glasses that can utilise the
DLP Link® signal embedded in the image) and
Off
•
3D Swap
—
Normal
and
Reverse
(set to
Reverse
if the left- and
right-eye images are displayed in the wrong order)
•
3D 24Hz Display
— set to 96Hz or 144Hz depending on the
source. This setting is disabled unless a 24Hz 3D input is detected.
The 3D Swap setting explained
The outgoing 3D frames are in pairs - the dominant frame being
presented first. You can determine which frame should be the dominant
one.
By convention the default setting is
Left
.
Notes
If
3D Format
is set to
Off
, or if
no 3D signal is detected in
Auto
mode, the other 3D settings will be
unavailable.
Frame Sequential
is supported on
the DVI input only.
3D video is only possible on the
HDMI, HDBaseT and DVI inputs.
The
Frame Packing
format is
automatically detected by the
projector.
See also
3D types
further in this
guide.
3D >>
Select Item
[RETURN] Back
DLP- Link
3D Swap
3D Format
3D 24Hz Display
Off
Off
Normal
144 Hz
Item Adjust
Dominance Left
Dominance Right
LEFT 1
RIGHT 1
LEFT 2
RIGHT 2
LEFT 3
RIGHT 3
LEFT 3
RIGHT 1
LEFT 1
RIGHT 2
LEFT 2
RIGHT 3
