page 25
Digital Projection E-Vision 6800 3D Series
Operating Guide
USING THE PROJECTOR
Rev A January 2015
Using The Projector
Main menu
•
Input
Press
ENTER
to open the list of available inputs.
Use the
UP
and
DOWN
arrow buttons to select an input from the list, then
press
ENTER
to confirm your choice.
Press
MENU
to return to the main menu.
•
Test Pattern
Choose from:
...Off, White, Black, Red, Green, Blue, Crosshatch, Burst, H Ramp, Color
Bar, Checkerboard...
Use the
LEFT
and
RIGHT
arrow buttons to switch between values.
•
Lens, Image
,
Color
,
Geometry
,
3D
,
Lamps
,
Setup
and
Information
Press
ENTER
to open these menus and access various settings.
Notes
If no input is connected, the
Image
menu will be unavailable.
Some settings are associated with
the current input and the value of
the
Image Mode
setting (
Bright
,
Presentation
or
Video
). The
projector automatically stores values
of such settings to reuse when an
Input
/
Image Mode
combination
is selected again. For example, if
you increase the
Contrast
value
while on the DVI-D input with I
mage
Mode
set to
Bright
, the next time
you use the DVI-D input with
Image
Mode
set to
Bright
, the projector
will automatically set the same
Contrast
value.
Settings NOT associated with an
Input
/
Image Mode
combination
are called
global settings
and are
indicated with a globe icon
in the
Menu Map
further in this guide.
E-Vision 6800 WUXGA 3D
Select Item
[Enter] Submenu
[Menu] Exit
Test Pattern
Lens
Color
Geometry
3D
Input
Off
8
8
8
8
HDMI
Image
Lamps
Setup
Information
8
8
8
8
E-Vision 6800 WUXGA 3D
Select Item
[Enter] Execute
[RETURN] Back
Test Pattern
Lens
Color
Geometry
3D
Input
DVI-D
HDBaseT
VGA
Component 1
Component 2
HDMI
Image
Lamps
Setup
Information
S-Video
Video
