background image

 

10

 

EN 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC RF Radiation Exposure Statement: 

1. This Transmitter must not be co-located or operating in conjunction with any other antenna 

or transmitter. 

2. This equipment complies with FCC RF radiation exposure limits set forth for an 

uncontrolled environment.    This equipment should be installed and operated with a 
minimum distance of 20 centimeters between the radiator and your body.

 

Federal Communications Commission (FCC) Statement 

15.21 

You are cautioned that changes or modifications not expressly approved by 
the part responsible for compliance could void the user’s authority to operate 
the equipment. 

 
15.105(b) 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures: 

 

-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

-Consult the dealer or an experienced radio/TV technician for help. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: 
1) This device may not cause harmful interference and 
2) This device must accept any interference received, including interference that may cause 

undesired operation of the device.

 

Summary of Contents for SMC-87












Reviews: