Digital Monitoring Products IP1006RR Page 87 User Manual Download

Page: 87 / 102

Advanced Administration

E-mail Alerts

Send E-mail alerts
immediately

You can choose to have alerts E-mailed to you, by checking the
desired checkboxes. The Wireless Router can send an immediate alert
when it detects a significant security incident such as

•

A known hacker attack is directed at your IP address

•

A computer on the Internet scans your IP address for open ports

•

Someone on your LAN (Local Area Network) tries to visit a
blocked site.

E-mail Logs

Send Logs

Select the desired option for sending the log by E-mail.

•

Never

(default) - This feature is disabled; Logs are not sent.

•

When log is full

- The time is not fixed. The log will be sent

when the log is full, which will depend on the volume of traffic.

•

Hourly, Daily, Weekly...

- The log is sent on the interval

specified.

•

Daily

is selected, the log is sent at the time specified.

Select the time of day you wish the E-mail to be sent.

•

Weekly

is selected, the log is sent once per week, on the

specified day, at the specified time.
Select the day and the time of day you wish the E-mail to be
sent.

Note:

If the log is full before the time specified to send it, it will be sent
regardless of the day and time specified.

Summary of Contents for IP1006RR







































































































Search results

Summary of Contents for IP1006RR

Reviews:

Related manuals for IP1006RR

Brands by name

Popular brands

Digital Monitoring Products IP1006RR, User Manual

Search results

Summary of Contents for IP1006RR

Reviews:

Related manuals for IP1006RR

Brands by name

Popular brands