Digital Monitoring Products Canadain XR500, User Manual, Page: 12 / 80

6 XR500/XR100 Canadian User’s Guide Introduction
Using the Keypad
Multi-lingual Display Option
Your system may be programmed to display the User Menu and
Status Display text in multiple languages. When the COMMAND
key is pressed, the option to choose the language displays. Select
the language you want to use. The language chosen continues to
display at this keypad until another language is chosen.
Keypad Displays Current Programming
Most User Menu options displayed at the keypad show the currently
selected option in the panel memory. These options are either
shown as a number, a blank, or a NO or YES . To change a number
press any top row Select key. The current option is replaced with
a dash. Press the number(s) on the keypad you want to enter as
the new number for that option.
It is not necessary to enter numbers with leading zeros. The panel
automatically right justifies when you press the COMMAND key. To
change an option that requires a NO or YES response, press the top
row Select key for the response not selected. For example, if the
current option is YES and you want to change it to NO , press the
third Select key. The display changes to
NO
. Press the COMMAND
key to go to the next option.
Multiple Displays (XR500 System Only)
For some User Menu options, such as
Access Areas
under
User
Profiles
there are several displays containing lists. For example,
when using Access Areas, areas 1 through 32 display on four
separate displays. First, areas 1 through 8 display. Press the
COMMAND key to display areas 9 through 16. Press the COMMAND
key again to display areas 17 through 25. Press the COMMAND key
one more time to display areas 26 through 32.
Note : Only areas pre-programmed at installation can be viewed.
Asterisks in Area Armed Displays
Asterisks display next to a programming option that is already
selected. As shown in the example, options that are selected to
display the current programming selection have an asterisk next
to the number. Those that are not selected simply display the
number. In the Areas example, areas 3, 8, 9, 15, 19, 23, 25, and 31
are not selected. The area numbers with asterisks are selected.
*29 *30 31 *32
*13 *14 15 *16
9 *10 *11 *12 25 *26 *27 *28
*1 *2 3 *4
*5 *6 *7
8 *21 *22 23 *24
*17 *18 19 *20
Areas
To select or deselect a number, simply enter the number using the
digit keys on the keypad. This same scheme is used when viewing
the panel armed status and other programming and operational
functions. Remember to press the COMMAND key to display the
rest of the area numbers on XR500 systems.
Note
: XR100 Systems support 8 areas.
32-Character Name Display
Your system may be programmed to display up to 32-character
names. When a name is displayed at the keypad, the top line of
the display shows the first 16 characters. If a name is longer than
16 characters, after two seconds the display automatically scrolls
to display the remaining characters.
If displayed as part of the Status List, the entire 32-character name
is displayed for four seconds followed by the number and status.