DIGITAL-LOGIC AG
FLATPANEL MANUAL V4.6
5 of 55
1
P
REFACE
This manual is for integrators and programmers of systems based on the MICROSPACE card family. It
contains information on hardware requirements, interconnections, and details of how to program the sys-
tem. The specifications given in this manual were correct at the time of printing; advances mean that
some may have changed in the meantime. If errors are found, please notify DIGITAL-LOGIC AG at the
address shown on the title page of this document, and we will correct them as soon as possible.
1.1 Trademarks
MICROSPACE, MicroModule
DIGITAL-LOGIC AG
DOS Vx.y, Windows
Microsoft Inc.
PC-AT, PC-XT
IBM
NetWare
Novell Corporation
Ethernet
Xerox Corporation
DR-DOS, PALMDOS
Digital Research Inc. / Novell Inc.
ROM-DOS
Datalight Inc.
1.2 Disclaimer
DIGITAL-LOGIC AG makes no representations or warranties with respect to the contents of this manual
and specifically disclaims any implied warranty of merchantability or fitness for any particular purpose.
DIGITAL-LOGIC AG shall under no circumstances be liable for incidental or consequential damages or
related expenses resulting from the use of this product, even if it has been notified of the possibility of
such damage. DIGITAL-LOGIC AG reserves the right to revise this publication from time to time without
obligation to notify any person of such revisions. If errors are found, please contact DIGITAL-LOGIC AG
at the address listed on the title page of this document.
1.3 Who should use this Product
- Electronic engineers with know-how in PC- and LCD technology.
- This manual assumes, that you have a general knowledge of PC-electronics.
- Because of the complexity and the variability of PC-technology, we can’t give any warranty that the
product will work in any particular situation or combination. Our technical support will help you to may
find a solution.
- Pay attention to the electrostatic discharges. Use a CMOS protected workplace.
- Power supply OFF when you are working on the board or connecting any cables or devices.
You need know-how in electronics and PC-technology to
install a system with a flat panel !
