CompuLan Center dba/Digital IDView Technologies
12000 Ford Road, Suite 110
, Dallas TX 75234
43
Pic 4.12 Intelligent analysis setting page
【
Channel No.
】
Only
shows by “1”
，
at present, only the 1
st
channel with maximum resolution of 1080P in
the full analog (DVR) mode and hybrid (HVR) mode
【
Enable
】
tick it to enable the video analysis function, then can go for further setting,
【
Algorithm rule
】
at drop-down box
to choose the algorithm rule of detection,
【
Rule
】
choose different algorithm rules, the related setting page is different.
Cordon:
Show traces
tick it to enable, when alarm triggers, there will be red box around moving objects.
；
Sensitivity
, base on different requirement, there are 3 options in the drop-down box
；
Minimum image distance
range between 0~30 %
，
the more flexible the less image distance.
；
Alert way
there are 2 kinds
：
cordon and warning area.
Cordon
：
Can set 3 prohibited directions:
bidirectional prohibited, from top to bottom (from left to right), from bottom to top (from right to left),
when the setting cordon is too slope, show with from left to right / from right to left, otherwise will be
from top to bottom / from bottom to top, when the moving object meet preset cordon rules, the alarm
will be triggered;
Warning area:
can set 3 kinds of prohibited directions: bidirectional prohibited,
enter and leave, when the moving object meet preset warning area rules, alarm will be triggered.
Rules click
setting
，
enter rule setting page, right click mouse, choose add, use mouse to fix two or
more point, and then connect them to form a line or a irregular region, after that a box of prohibited
direction options will come out, choose one of them, right click mouse, click Yes, return to previous
