CompuLan Center dba/Digital IDView Technologies
12000 Ford Road, Suite 110
, Dallas TX 75234
23
been set up)
Step 3: repeat step1 and step2, until set out all the preset designated cruise lines
。
Remove Preset
：
Please input preset value in the blank, click Remove Preset button, then remove
the preset points.
Remove Cruise Line
：
Input the number of cruise line, click Remove Cruise Lines button, then
remove the cruise lines set
。
Picture 3.13 Cruise between Points Settings
2
）
The Calls of Cruise between Points
In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please input
the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to work on the
cruise line. Click Stop button to stop cruise.
3
、
Scan
PTZ also can work on the preset scan line repeatedly.
1
）
Scan setup
Setting steps:
Step1: In Picture 3.10, click Setup button
，
enter Picture 3.14
；
Step2: Click Scan button
，
the input proper value in the scan value blank;
Step3: Click Start button, enter Picture3.10
，
here you can set the following items: Zoom, Focus,
Aperture, Direction and so on. Click Setup button to go back Picture 3.14
Step4: Click End button to complete setup
。
Click the right button of the mouse to exit.
Cruise Button
Cruise Line Blank
Preset Points Blank
Time interval
