Digital Equipment WS520, User Manual

Page: 2 / 44

April 1994
PUBLICATION ISSUED BY:
Ing. C. Olivetti & C., S.p.A.
Direzione Documentazione
Via Jervis, 77-10015 Ivrea (To)
Copyright © 1994 by Ing. C. Olivetti & C., S.p.A. All Rights Reserved.
Notice: The information contained in this document is subject to change without any
previous notice. Ing. C. Olivetti & C., S.p.A. shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material. This document contains information which is
protected by copyright. All Rights are reserved. No part of this document may be
photocopied, reproduced, or translated to another language. Ing. C. Olivetti & C.,
S.p.A. reserves the right to modify the equipment described in this manual at any
time and without notice.
Olivetti is a registered trademark of Ing. C. Olivetti & C.,S.p.A.
ADDS is a trademark of Applied Digital Data Systems, Inc. DEC and VT are
trademarks of Digital Equipment Corporation. IBM, ProPrinter, and PS/2 are
registered trademarks of International Business Machines Corporation. SCO is a
trademark of Santa Cruz Operations, Inc. TVI is a trademark of TeleVideo, Inc.
UNIX is a registered trademark of UNIX System Laboratories, Inc. WY and WYSE
are registered trademarks of Wyse Technologies. The Energy Star emblem does not
represent EPA endorsement of any product or service.
Printed in Taiwan.
U.S.A. FCC ID: A09-VGB20
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. Any changes or modifications made to this equipment may
void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio and television reception; however, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.