Digital Equipment WS520, User Manual

Page: 17 / 44

Installation and Set-Up
1.2 Set-Up
Notes
For a session to be enabled, it must be assigned to a comm
port. If you assign more than one session to the same comm
port, you must use a terminal server that supports Terminal
Device Session Management Protocol (TD/SMP), or a host that
supports Session Support Utility (SSU).
A port cannot be assigned as both a comm port and a printer
port at the same time.
Selecting Comm = ‘‘ none’’ disables a session. A session that
is dimmed is disabled, but it can still be configured in Set-Up.
Figure 1–3 Communications Port Set-Up Screen
MA047493.GRA
Installation and Set-Up 1–9