Diagnostics
3-3
You enter the command test to test the entire system using exercisers. No
module self-tests are executed when the test command is issued without a
mnemonic.
When you specify a subsystem mnemonic or a device mnemonic with test
such as test xmi0 or test ka7aa1, self-tests are executed on the associ-
ated modules first and then the appropriate exercisers are run. Table 3-1
lists the exercisers associated with each module.
The same set of tests that run at power-up will run if you enter a test iop0
or a test dwlman command.
Table 3-1
Exercisers
NOTE: Testing tape devices is not supported by the test command. Run
DUP-based tests to test an MSCP-based tape device. See Section
3.3.
Module
Module Self-Test Run?
Exerciser
KA7AA
Yes
Floating-Point,
Multiprocessor,
Memory
MS7AA
No
Memory
CIXCD
Yes
Disk
DEMFA
Yes
Network
DEMNA
Yes
Network
KDM70
Yes
Disk
KFMSA
Yes
Disk
Disk Device
No
Disk