3-2
Diagnostics
3.1 Test Command
The test command allows you to test the entire system, an I/O sub-
system, a single module, a group of devices, or a single device.
Example 3-1
Test Commands
P00>>> test # Tests the entire system.
# Default run time is 10
# minutes.
P00>>> t xmi0 -t 60 # Tests all devices
# associated with the XMI0
# I/O subsystem. Test
# run time is 60 seconds.
P00>>> t xmi1 -omit "demna*" # Tests all devices
# associated with XMI1 except
# for Ethernet devices.
P00>>> t -nowrite "dub*" -write -t 120
# Do write/read/compare
# testing on all disks not
# associated with controller
# b. Test run time is 120
# seconds.
P00>>> t demna* # Tests all DEMNA adapters.
P00>>> t du*.0.4.0 # Tests all MSCP disks
# associated with the
# adapter in slot 4 of
# XMI0.
P00>>> t -q # Status messages will not be
# displayed during system
# test.