Operating the RWZ52
To manually eject a cartridge
The RWZ52 does not automatically eject an optical cartridge if a power
failure occurs. An eject tool was shipped with the RWZ52 to eject a
cartridge manually.
Follow these steps to remove the cartridge from the optical drive:
Step 1.Disconnect all power to the drive.
Step 2.Insert the eject tool into the small round hole in the front panel of
the drive.
Step 3.Turn the eject tool in a clockwise direction (to the right) until the
disk is ejected through the front of the drive (approximately 20
complete rotations).
NOTE:
After ejecting a cartridge, the drive remains in
"eject position" until power is restored. At that
time, the drive automatically resets itself.
4-3
