Prioris XL and XLDP Server Powergrade Kit
5
Replace the Panel and Reconnect the Cables
1. Install the left side panel. The server will not power up with the side panel
removed.
2. Connect the cables, the monitor power cord, and the server power cord to
the back of the server.
Power Up the Server and Update Your BIOS
1. Turn on your server and allow the POST to complete. Your computer
automatically boots from the BIOS Upgrade diskette in Drive A.
2.
At the MS-DOS prompt, change the directory to upgrade.
Example:
A:\cd upgrade
3.
At the MS-DOS prompt, type:
upgrade
NOTE:
You must have an MS-DOS formatted diskette for the
current BIOS and for the upgrade BIOS.
4. At the menu, select "Make Recovery Diskette From Flash."
5. At the menu, select "Flash BIOS from IMAGE File." Press Continue and
select the following:
V208_EN.BIN
Program
The BIOS upgrade procedure will run automatically.
NOTE:
DO NOT power down the system once this procedure has
started. If the system loses power, or if at the end of this procedure
the system fails, please refer to the section, "Troubleshooting – Using
the Crisis Recovery Diskette if Necessary."
The system will reboot at the termination of the upgrade procedure.
6. Remove the diskette from Drive A.
