16
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
• Be sure to perform the auto gain control when the
screen has both 100% black and 100% white
areas displayed.
Saves the setting and quits the OSD. Saves all the adjusted settings in the
EEPROM.
End of OSD
Auto Gain (Analog RGB only)
Icon selection
Icon decision
• Be sure to perform the auto adjust while things
except that black are shown on sides of the
display.
Switches Analog RGB and DVI-D, and quits the OSD.
Cancels the setting and then returns to the top menu.
Input Source
Auto Adjust (Analog RGB only)
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Resets all the settings and then returns to the top menu.
Cancels the setting and then returns to the top menu.
All Reset
Note
Regardless of the above clause, Digital
Electronics Corporation shall not be
held responsible for any damages or
third-party claims for damages or
losses resulting from the use of this
product.
PFX122672K .FP3710-MT23E-BTH 2012.3 SS/B ©2011 Digital Electronics Corporation
Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-
ku, Osaka 559-0031, Japan
URL:http://www.pro-face.com/
The information in this document is subject to change without notice.
