DIGITAL Server 9100 Series User's Guide
2-1
Chapter 2
Installing and Removing System
Components
This chapter describes how to install and remove system components that you can access without
removing the covers. It includes the following procedures:
•
Installing or swapping a SCSI drive in a hot-swap bay
•
Removing and installing power supplies
Terms, Conventions, and Related Documents
Refer to the “Preface” of this document for important information on how to use this book, terms and
conventions, and related documents.
When used in this chapter, the term “configuration utility” refers to the System Configuration Utility
(SCU). The “Configuring Your Server” section of Chapter 3 of the DIGITAL Server 9100 Series System
Software Guide discusses how to use the SCU in detail.
Tools and Supplies Needed
You need the following tools and supplies to perform the procedures described in this chapter:
•
Phillips #1 and #2 screwdrivers
•
Hexagonal-head nut driver
•
Standard tip screwdriver
•
Antistatic wrist strap and conductive foam pad (recommended)