Managing the DECserver 90L+
Accessing MOP from ULTRIX
On ULTRIX operating systems, the console carrier is a separate utility included
as part of the MOP option. The option is part of the regular distribution but
is not selected by default and is not included in the basic installation. You can
install MOP from the original distribution media by using the setld utility. You
must have superuser privileges to invoke console carrier.
After the MOP option is installed, each DECserver 90L+ to be managed must be
given a name and a dummy node number, using the addnode utility. For example:
# addnode 13.1 DS90L
After the name and node number is assigned, you can establish the link at any
time by using the ccr command:
#
ccr -n DS90L -h 08-00-2B-08-32-2B -c sva-0
In this example, the -h qualifier is followed by the station address of the
DECserver 90L+ unit to be attached. The -c qualifier is followed by the name
of the Ethernet circuit to use for the connection. Table 4–2 is a partial list of
Ethernet circuit names, based on system type.
Table 4–2 Ethernet Circuit Names for ULTRIX-Based Systems
System
Ethernet Circuit Name
VAX 6000 and VAX 9000 XMI computers
mna-0
BI-based systems (VAX 6300 and VAX 6400 computers)
bna-0
VAX 4000 computers
isa-0
MicroVAX/3600/3900 computers
qna-0
VAXstation 2000 and 3000 computers
sva-0
DECstation 3000 and 5000 computers
sva-0
VAX–11/780 and VAX–11/785 computers (UNIBUS)
una-0
4–4 Managing the DECserver 90L+
