Installing the DECserver 90L+
Start Terminal Session.
1.
Connect terminals to ports as needed.
2.
To start a terminal session using a terminal connected to one of the ports:
a.
With the terminal turned on, press
Return
twice. This sets the baud rate
of the port to that of the terminal.
b.
At the prompt (->), enter a service name and press
Return
.
The DECserver 90L+ responds by displaying a string of dots "......" while
connecting to the selected service. Once the connection is established, the
system-dependent login message or prompt will appear.
Note
The DECserver 90L+ can take up to one minute when connecting to a
node for the first time.
For more information on using the DECserver 90L+, refer to Chapter 3 in this
manual.
Installing the DECserver 90L+ 2–9