Operating the DECserver 90L+
Last Number Redial
Last number redial allows a port to connect to the last service accessed without
entering the service or node name. This is done by entering the CONNECT
command C[ONNECT] at the DECserver 90L+ prompt and pressing
Return
. The
following example shows how to use the last number redial feature to reconnect
to service RED.
$ LO
Return
USER logged out at 01-JAN-1992 16:55:00.00
-> C
Return
%DS90L-108, RED session 1 established
Welcome to MYNODE running VMS 5.4
Username:
Note
The use of a preferred service overrides the last number redial feature.
Interrupting a Terminal Session
You can interrupt a terminal session and return to the DECserver 90L+ prompt
by pressing the
Break
key on the terminal. When you press the
Break
key, the
session is interrupted, not ended, and the DECserver 90L+ prompt appears as
follows:
->
Operating the DECserver 90L+ 3–3
