11
DECserver 900GM Installation
Removing the Module
1
Disconnect all the cables from
the module.
a. To remove the bulk cables,
use a flat-blade screwdriver to
loosen the two screws at the
ends of the plugs, then
disconnect the cable.
2
Unseat the module from the
DEChub 900 MultiSwitch.
a. Lift the release lever located
on the top of the DEChub 900
mounting slot.
b. Pivot the module back on its
bottom mounting tab, and
remove the module from the
backplane.
LKG–8761-93I
Mounting
tab
LKG–8717-93I
Lift release
lever
