DEChub ONE
7
Removing the Module
The DEChub ONE can accommodate any DEChub 900 Ethernet module and can
be used anywhere that an Ethernet LAN connection is available. You can easily
swap modules or disconnect the DEChub ONE by following these steps:
1
Shut off the ac power to the DEChub ONE.
Either turn the wall receptacle switch to off or disconnect the ac power cord from
the wall receptacle.
2
Disconnect cables from the DEChub ONE as required.
3
Disconnect cables from the module as required.
4
Separate the DEChub ONE from the module.
a.
Loosen and lift the locking L-bracket screw on the DEChub ONE.
b.
Pivot the module away from the DEChub ONE.
Mounting tab
Locking L-bracket
Network Module
DEChub ONE
