Console Commands
A-6 AlphaStation 500 Series User Information
Enter the osloader directory and name:
\os\winnt\osloader.exe
•
Whether or not the operating system is in the same partition as the osloader.
Is the operating system in the same partition as the
osloader:
Yes
No
•
The operating system root directory.
Enter the operating system root directory: \winnt
•
A name (identifier) for this boot selection.
Enter a name for this boot selection: Windows NT
•
Whether or not the debugger should be initialized at startup time.
Do you want to initialize the debugger at boot time?:
Yes
No
After you add a boot selection, use the
Check boot selections
command to
perform verification testing of the selections. If the system detects an error, it prompts you
to ignore, delete, or change the boot selection.
Along with adding boot selections, the Boot selections menu allows you to:
Change a boot selection
Check boot selections
Delete a boot selection
Dump boot selections
Rearrange boot selections
Machine Specific Setup
You reach the Machine specific setup menu from the Setup menu. Use this menu to
control PCI parity checking, which is (by default) set to On, and SCSI termination of the
external portion of the SCSI bus, which is (by default) set to Internal.
