Console Commands
AlphaStation 500 Series User Information A-5
If you selected
Other language,
you are prompted for the location of the
message and font files. Go to step 2.
2. Insert the diskette or CD-ROM containing the ARC console firmware message and
font files into a drive. If the files are located on your hard disk, go to step 3.
3. Select
either
Floppy disk
,
CD-ROM
, or
Hard Disk
as appropriate, and press
[Enter]. The languages available are displayed on the screen.
4. At the
Language menu
, select the language of your choice and press [Enter].
5. The screen clears and you are asked if you would like to save the language files to
hard disk. Select
Yes
and press [Enter].
6. You are prompted to choose a location on the hard disk for the language files. (A
default location is selected.) Press [Enter] to accept the default; otherwise, select
Alternate Hard Disk location
and press [Enter].
Edit the partition and the directory location to indicate where you wish to store the
language files, then press [Enter]. The language files are copied to the hard disk, and the
ARC
Boot menu
appears in the language you selected.
__________________________ Note _____________________________
You can also change the default language at the other time by selecting
Set up
the system
, then selecting
Set system language
, and following the
prompts.
____________________________________________________________
Manage Boot Selection Menu
You reach the Boot selection menu by selecting
Manage boot selection menu
from the Setup menu. Use the Boot selection menu to add, change, check, delete, dump
(list), and rearrange boot selections.
Initially, select
Add a boot selection
. You are then prompted to select:
•
A system partition for this boot selection. (The partition defined by the
Set
default environment variables
command should be one of your choices.)
Select a system partition for this boot selection.
SCSI Bus 0 Hard Disk 0 Partition 2
New System Partition
(The partition defined by the
Set default environment variables
command
must be one of the available choices.)
•
The osloader directory and name.
