14
2) Loosen and remove the middle
three(3) screws from the terminal
strip. Align the crimp terminals
with each screw hole, and tighten
the screws.
• The colors in the figure above
are for the cable which came
with the PL.
• This power cable is designed
only for AC100/115V use. Be
sure to use a different cable
when using other than AC100/
115V power.
Black
White
Green/
Yellow
Transparent
Cover
Attachment
Screws
3) Reattach the terminal strip’s
transparent cover with the
attatchment screws.
• Crimp Terminal Types :
V1.25-3, by J.S.T. or equivalent
(JIS standard part number :
RAV1.25-3
)
• Crimp terminals must be the same
as shown below.
L
N
FG
L
N
FG
φφφφφ
3.2 mm or larger
Max. 6.0 mm
1) Confirm that the PL unit's power switch is
turned OFF. Then, remove the power terminal’s
transparent plastic cover.
POWER
Transparent Cover
I :ON
o :OFF
Use the following steps when connecting the power cord to the PL’s power
terminals.
Screws
L
N
FG
