TellerScan
®
TS500 User Manual
Rev 111618
Page | 13
LED Status Indicator and Smart Button Operation (continued)
Flashing Green LED:
Scanning in progress.
Flashing Red LED:
Indicates that the exit pocket is full, a scanning error has occurred, or that an item has
stopped in the path
Solid Blue Clean LED:
Cleaning is required. A Digital Check cleaning card is needed to clean the scanner.
See the
Cleaning the TS500 Drive Rollers Using a Cleaning Card
section for additional information on how to
clean the TS500 scanner.
Press the Smart Button 3 times in a span of 3 seconds to
start the scanner’s cleaning mode.
AccuTrac™ Plus Feed System
Note:
Only for scanners that have the factory installed AccuTrac Plus feed system.
AccuTrac Plus can be turned on and off. Changing this setting requires that the TS500 is currently connected
to a scanning application
– Digital Check’s test software or the user’s banking software. Ensure that the entry
pocket is empty before adjusting this setting.
•
Enable:
Press the Smart Button twice. The LED light will blink orange.
•
Disable:
Press the Smart Button twice. The LED light will blink green.
