VuLink Operation & Installation Guide
860
‐
00198
‐
00 REV E
Digital
Ally,
Inc.
|
VuLink
Configuration
4
‐
5
You may now override the default device settings. Check the box next to
VuLink Setting
and select a VuLink serial number to assign to your FirstVu HD device. When done, press
Save.
Activating FirstVu HD within VuVault
After you have assigned your FirstVu HD to a Vulink device serial number, proceed to
Admin>Media Card Admin
to activate your FirstVu HD. Before activation, be sure to upload
any existing videos into VuVault.
1. Turn on your FirstVu HD & plug it into your computer using the supplied USB cable.
2. Select FirstVu HD as the device type. Click
Refresh
and the FirstVu HD will be displayed
as a removable drive.
3. Highlight the drive with your mouse.
4. Select
.
When done,
unplug your FirstVu HD.
5. All done! Your FirstVu HD is now ready for use with VuLink.
Using Configuration Manager to Configure your VuLink and FirstVu HD
VuLink must be configured prior to use. Configuration for VuLink is determined by the
configuration file that is saved to the device from Digital Ally’s VuVault™ back-office software,
or
by using the
Mini Configuration Manager
supplied on the internal memory.
Using VuVault™ to manage your devices is preferred, but not required. If you are not
utilizing VuVault, follow the instructions in this section to configure and activate your
device using the stand-alone
Mini Configuration Manager
software.
Using this method, you will assign all of your FirstVu HD’s to a single VuLink by creating
a configuration file. To set up multiple VuLink configurations, repeat the following process
for each VuLink device and save the new configuration file to VuLink and associated
FirstVu HD’s.
