Digital-Ally VuLink, Operation And Installation Manual

Page: 14 / 30

VuLink Operation & Installation Guide 860 ‐ 00198 ‐ 00 REV E
Digital Ally, Inc. | Model ‐ Specific Wiring Diagrams 3 ‐ 7
Generic Input Source
Using this method, an in-car video system is not required. Your FirstVu HD may be wirelessly
activated by connecting VuLink to any vehicle input sensor. Use the Orange wire if connecting
to the emergency lights or other +12VDC trigger. Or, use the Brown wire if connecting to an
active low (0VDC) input trigger.
The White wire can be used to trigger an auxiliary device when the FirstVu HD record button is
pressed.
BLUE = +12VDC Switched Ignition
RED = +12VDC Battery (Fused)
ORANGE = Input Trigger (active high)
BROWN = Aux Input Trigger (active low)
WHITE = +12VDC Output Trigger
VuLink Base Cable
008 ‐ 01456 ‐ 00
NC
BLACK = Chassis Ground