VuLink Operation & Installation Guide
860
‐
00198
‐
00 REV E
Digital
Ally,
Inc.
|
VuLink
Configuration
4
‐
1
Section
‐
4:
VuLink
Configuration
VuLink must be configured prior to use. Configuration for VuLink is determined by the
configuration files that are transferred to the device from Digital Ally’s
VuVault™
back-office
software or the
Mini Configuration Manager
software
.
Using VuVault to Configure your VuLink and FirstVu HD
If you are using
VuVault™
to manage your devices, follow the instructions beginning on this
page to configure and activate VuLink.
If you are not using VuVault to manage your devices, skip to page
4-5
to configure
your device.
You must have VuVault version 4.5 or above to configure and activate a VuLink device.
MicroVu HD requires VuVault 4.7 or above.
VideoManagerII and previous versions of
VuVault will not work with VuLink.
Log on to
http://www.digitalallyinc.com/login.cfm
and register for an account to be an
authorized user. By registering you will be able to download all the latest Product
Guides, Firmware/Software updates and will be notified of future upgrades. VuVault is
used to manage VuLink settings as well as activate your device for use within the
system.
Before you can configure VuLink for use within VuVault, the serial numbers for your
FirstVu HD devices must be added into the system. Select
Admin> Devices> Add Device
to add your devices into VuVault. Type in your device serial numbers and assign a name
within the system. When done, select
Close
, then
Save
(for more information consult the
VuVault Administrator’s Guide
“Adding Devices”
section).
