Digital Ally, Inc.
|
Getting Started
2-3
FirstVu HD Operation Guide
|
860-00177-00 Rev J
Setting the date and time manually
The date and time is set by the factory prior to shipment and should not need manual
adjustment. However, date and time can still be set manually if needed. Follow the
procedure below to manually set the date and time.
1. Open Notepad from your computer.
2. In Notepad, type in the year, month, day, hour, and seconds you
wish to program into the
FirstVu HD
. Use the following format
(YYYYMMDDHHMMSS) using 24 hour UTC time. You must also apply
your time zone offset. For example, If you live in the CST zone and
the current date & time is 5/23/2017 10:47:50pm, you would enter
20170524044750. Since CST is UTC-6, you have to add 6 hours to the
current time to reflect the UTC time.
3. Go to
File > Save As
and name the file “DATE.txt”
4. Connect your
FirstVu HD
via the supplied USB cable and transfer the
DATE.txt file to the root drive.
5. Cycle the power on your
FirstVu HD
. The unit will apply the system
date/time during boot up. When completed, the
FirstVu HD
will erase
the .txt file.
