860-00324-00 Rev B 8
4
Product Installation
Installation of OET-213H
For the wiring and installation of the device, refer to the
ET-B31H-M@B Face Recognition Access Control Terminal
Quick Guide
.
5
Local Operations
5.1
Initial Interface
When the face recognition terminal is used for the first time or the factory defaults are restored, users need to
set the activation password, which is used to log in to the
Activation Config
interface.
NOTE!
⚫
The password must contain at least eight characters (including at least two of the following types: upper case
letters, lower case letters, digits, underscores, and hyphens).
⚫
The activation password is consistent with the password for the
admin
to log in to the Web interface. If the
activation password is changed, use the new password to
log in to t h e Web interfa ce
.
After the activation password is configured, the
main inter face of the visual intercom face recognition ter
minal
is displayed. If the activation password needs to be changed later, refer to "
Activation Password
" to
change the password.
Figure5-1
Activation Password Configuration Interface
Summary of Contents for DTM-600
Page 1: ...860 00324 00 Rev B 1 DTM 600 User Guide...
Page 93: ...860 00324 00 Rev B 93...
