860-00324-00 Rev B 21
Table5-1
Parameter Description and Configuration
Parameter
Parameter Description and Configuration
Management Center IP
Enter the IP address of the management center.
After configuration, a user can tap
Call Management Center
on the GUI to call the
management center.
NOTE!
The management center IP address must be in the same network segment as the device
and cannot begin with 127.
Community
Enter the name of the community to which the device belongs.
A string of 1 to 35 characters (1 to 11 Chinese characters) can be entered.
Building
⚫
Enter the No. of the building where the device is located.
⚫
The value must be an integer in the valid range of 1 to 99.
Configurable Units
Select the quantity of units that can be served by the device from the drop-down list.
The options include
1
,
2
, and
3
.
Unit
Enter the No. of the unit where the device is located.
The value is an integer in the valid range of 1 to 9.
(3)
Tap
Save
to complete the device location information configuration.
5.5.3
Network Setting
On the
Network Setting
interface, you can modify the device IP address and other communication parameters so
that the device can communicate with external devices.
(1)
On the
Activation Config
interface, tap
to go to the
Network Setting
interface.
Figure5-15
Network Setting Interface
(2)
Set network parameters by referring to the table below.
Summary of Contents for DTM-600
Page 1: ...860 00324 00 Rev B 1 DTM 600 User Guide...
Page 93: ...860 00324 00 Rev B 93...
