DG-BR4400AC User Manual
114
After you finish with all settings, please click ‘
Apply
’ button and the following
message will be displayed on your web browser:
Please click ‘
Continue
’ to back to previous setup menu; to continue on other setup
procedures, or click ‘
Apply
’ to reboot the router so the settings will take effect
(Please wait for about 40 seconds while router is rebooting).
click ‘Delete All’ button.
Reset
You can also click ‘ Reset ’ button to unselect all MAC
addresses.
Enable IP
Filtering
Check this box to enable IP address based filtering, and
please select ‘Deny’ or ‘Allow’ to decide the behavior of
IP filtering table. If you select deny, all IP addresses listed
in filtering table will be denied from connecting to the
network; if you select allow, only IP addresses listed in
filtering table will be able to connect to the network,
rejecting all other network devices.
IP Filtering
Table
All existing IP addresses in filtering table will be listed
here.
Add PC
Click this button to add a new IP address to IP filtering
table, up to 20 IP addresses can be added. Please refer to
section 3-3-1-1 ‘Add PC’
below.
Delete
If you want to delete a specific IP address entry, check the
‘select’ box of the IP address you want to delete, then click
‘Delete Selected’ button. (You can select more than one IP
address).
Delete All
If you want to delete all IP addresses listed here, please
click ‘Delete All’ button.
