DG-BR4400AC User Manual
100
After you finish with all settings, please click ‘
save
’ button , you’ll be brought back
to previous menu, and the rule you just set will appear in current QoS table; if you did
anything wrong, you’ll get an error message when you click ‘Save’ button, please
correct your input by the instructions given by the error message.
If you want to erase all values you just entered. Click‘
Reset
’
on a single port, just input the port number, like ‘80’.
Remote IP
Address:
Specify the remote (destination) IP address that will be
affected by this rule. Please input the starting IP address in the
left field, and input the end IP address in the right field to
define a range of IP addresses, or just input the IP address in
the left field to define a single IP address.
Remote Port
Range
Please input the range of remote (destination) port number
that will be affected by this rule. If you want to apply this rule
on port 80 to 90, please input ’80-90’; if you want to apply
this rule on a single port, just input the port number, like
‘ 80 ’ . If the remote (destination) IP address and /or port
number is universal, just leave it blank.
Traffic Type
Please select the traffic type of this rule, available options are
None, SMTP, HTTP, POP3 and FTP. You can select a specific
traffic type for this rule, if you want to make this rule as a IP
address based rule (apply the limitation on all traffics from /
to the specified IP address / port number), select‘None’.
Protocol
Please select the protocol type of this rule, available options
are TCP and UDP. If you don ’ t know what protocol your
application uses, please try ‘TCP’ first, and switch to ‘UDP’
if this rule doesn’t seem to work.
