DG-BR4313NG User Manual
65
WAN interface settings must be correctly set, or the Internet connection will fail, even
though L2TP settings are correct. Please contact your Internet service provider if you don’t
know what you should fill in these fields.
Now please go to L2TP settings section:
Here is the description of every setup item:
Parameter
Description
User Name
Please input user ID (user name) assigned by your
Internet service provider here.
Password
Please input the password assigned by your Internet
service provider here.
L2TP Gateway
Please input the IP address of L2TP gateway assigned by
your Internet service provider here.
MTU
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Connection type
Please select the connection type of Internet connection
you wish to use. Refer to Note given in
Section 2
-3-4
Setup procedure for ‘PPPoE xDSL’
for detailed
descriptions.
Idle Time Out
Please input the idle time out of Internet connection you
wish to use. Refer to Note given in
Section 2
-3-4 Setup
procedure for ‘PPPoE xDSL’
for detailed descriptions.
When you finish with all settings, please click ‘OK’ button and the following message will
be displayed on your web browser:
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
Please click ‘Continue’ to go back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 55 seconds while router is rebooting).
