DG-BR4313NG User Manual
109
3-3-1 Access Control
This function allows or denies computers with specific MAC addresses from connecting to
the network; it can also allow or deny computers with specific IP addresses, protocols, or
ports. Please click ‘Access Control’ menu on the left of web management interface, under
the ‘Firewall’ tab and the following message will be displayed on your web browser
.
Here is the description of every setup item:
Parameter
Description
Enable MAC Filtering
Check this box to enable MAC address based filtering, and
please select ‘Deny’ or ‘Allow’ to decide the behavior of
MAC filtering table. If you select ‘Deny’, all MAC
addresses listed in filtering table will be denied from
connecting to the network; if you select ‘Allow’, only
MAC addresses listed in filtering table will be able to
connect to the network, and rejecting all other network
devices.
Client PC MAC address
Please input the MAC address of the computer or the
network device here, dash (-) or colon (:) are not required.
(i.e. If the MAC address label of your wireless device
indicates ‘aa-bb-cc-dd-ee-ff or aa:bb:cc:dd:ee:ff’, just input
‘aabbccddeeff’
Computer Name
Click on the menu and all the computers connected to the
router will be listed here. You can easily select the
computer name without checking the IP address of the
computer.
Comment
You can input any text here as the comment of this MAC
