DG-BR4313NG User Manual
103
Applications selection and click ‘Add’ to auto fill the
TCP/UDP Ports and Comment.
Add
Add the setting to the ‘Current Trigger-Port Table.’
Reset
Click ‘Reset’. This will clear all above settings and you will
have to reconfigure the unit again.
Current Trigger-Port Table All the settings for the special applications will be listed here.
Delete
Please select a special application by clicking the ‘Select’ box
of the mapping, then click ‘Delete’ button to remove the
setting. If there’s no setting here, this button will be grayed
out.
Delete All
Delete all settings existed in Current trigger port table.
Reset
Unselect all settings.
After you finish with all settings, please click ‘Apply’ button and the following message will
be displayed on your web browser:
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button
Please click ‘Continue’ to go back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 55 seconds while the router is rebooting).
NOTE:
Only one LAN client can use a particular special application at a time.
