DG-BG4011N User Manual
The following table describes the interfaces and buttons of the device.
Interface/Button
Description
Line
RJ-11 interface, for connecting the interface of the
telephone set through the telephone cable.
WLAN
Button to enable or disable WLAN.
Reset
Restore to factory defaults. To restore factory defaults,
keep the device powered on, push a paper clip into the
hole to press the button for over 5 seconds and then
release.
WPS
Button to enable or disable WPS.
LAN1, LAN2,
LAN3, LAN4
RJ-45 interface, for connecting the Ethernet interface of a
computer or an Ethernet device.
Power
Power interface, for connecting the interface of the power
adapter.
Power switch, for turning on or off the power of the device.
1.3 System Requirements
Recommended system requirements are as follows:
A 10 baseT/100BaseT Ethernet card is installed on your PC.
A hub or switch is available for connecting one Ethernet interface on the
device and several PCs.
Operating system: Windows XP, Windows 2000, Windows ME, or Windows
98SE.
Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or Firefox 1.5 or
higher
7
