DG-BG4011N User Manual
24
In this page, you can configure the parameters of wireless LAN clients that may
connect to the device.
The following table describes the parameters in this page.
Field
Description
Enable Wireless
Select or deselect the check box to enable or disable
the wireless function.
Enable MultiAP
Isolation
Select or deselect the check box to enable or disable
multiAP isolation. If this function is enabled, clients of
different SSIDs cannot access each other.
Wireless Network
Name (SSID)
Network name. It can contain up to 32 characters. It can
consist of letters, numerals, and/or underlines.
Visibility Status
Visible
indicates that the device broadcasts the
SSID.
Invisible
indicates that the device does not
broadcast the SSID.
Country
Select the country where you are in from the drop-down
list.
Wireless Channel
Select the wireless channel used by the device from the
drop-down list. You can select
Auto Scan
or a value
from
CH1
—
CH13
.
Auto Scan
is recommended.
802.11 Mode
Select the 802.11 mode of the device from the
drop-down list. The device supports 802.11b, 802.11g,
802.11n, 802.11b/g, 802.11n/g, and 802.11b/g/n.
Band Width
You can set the bandwidth only in the 802.11n mode.
You can set the bandwidth of the device to
20M
or
40M
.
Click
Apply
to save the settings.
