manualshive.com logo in svg

Digisol DG-BG4011N, User Manual

Share
Download
Digisol DG-BG4011N User Manual Download Page 34

                                             

DG-BG4011N User Manual

 

 

By default, 

Enable DHCP Server 

is selected for the LAN interface of the device. 

DHCP service provides IP settings to workstations configured to automatically obtain 

IP settings that are connected to the device through the Ethernet port. When the 

device is used for DHCP, it becomes the default gateway for DHCP client connected 

to it. If you change the IP address of the device, you must also change the range of IP 

addresses in the pool used for DHCP on the LAN. The IP address pool can contain up 

to 253 IP addresses. 

 

Click 

Apply

 to save the settings. 

 

By default, DHCP Server is enabled on all the LAN ports. You can enable/disable 

the LAN port on which the DHCP Server should be enabled. 

 

In the 

LOCAL NETWORK

 page, you can assign LAN IP addresses for specific 

computers according to their MAC addresses. 

 

 

 

34 

 

 

Summary of Contents for DG-BG4011N









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands