Page 23
DGIMST10 -
DigiSender® iMedia® SmartSender™
3.1.3 Access Point Mode Connection
This is a direct Wi-Fi connection between the iMedia® SmartSender™ and your PC or Laptop.
Because it uses your computers Wi-Fi connection directly, you will not be able to connect to your
wireless router and so you will not be able to connect to the internet. Its uses are therefore limited
to situations where an internet connection is not needed, for example, office presentations. This
also limits the use of the iMedia® SmartSender™ to ‘
PC Sender Mode
’ only.
Note:
If your PC or Laptop is connected to your router with an Ethernet Cable or it has two Wi-Fi cards/dongles
installed, then you will still be able to access the internet on your computer.
ANT
AV OUT
DC 12V
HDMI OUT
ETHERNET IN
USB 1
USB 2
RESET
Connect the included Power Cable to the socket
labelled ‘
12V DC
’ on the back of the iMedia®
SmartSender™. Connect the plug section to an
available mains socket and switch the unit on.
1.
In the bottom right corner of your PC or Laptop
screen, you will see a small Network Icon. Left
click this Network Icon to bring up a list of all the
Wi-Fi devices in your immediate area.
2.
continued on next page . . .
PC or Laptop
DigiSender
®
iMedia
T h e S m a r t T V i n t e r f a c e f o r y o u r S m a r t p h o n e , T a b l e t , L a p t o p & P C
iMedia® SmartSender™
Router
Internet
ADSL
Wi-Fi
3.1.3 Access Point Mode Connection