DigiSender DGIMST10, User Manual, Page: 10 / 48

Page 10
DGIMST10 -
DigiSender® iMedia® SmartSender™
2.3.1 Basic Usage
The following section will explain the basics of using the iMedia® Utility Program.
Important Note: It can take up to several minutes for the iMedia® Utility Program and iMedia® SmartSender™
to sync. If after a few minutes they have still not synced, try disabling your Firewall. See Section ‘
5.1.2 Network
Discovery & Firewall Checking
’ on page 36 for more information.
2.3 Using the iMedia® Utility Program
To run the iMedia® Utility Program, double click
the iMedia® Utility Program Shortcut on your PC
or Laptop desktop.
1.
Windows Firewall may prompt you to “ Allow Ac-
cess ”. If it does so, tick the boxes for both ‘ Private
Networks ’ and ‘ Public Networks ’ and then click
‘ Allow Access ’.
2.
The iMedia® Utility Program will then start run-
ning and attempt to connect to the iMedia®
SmartSender™.
3.
continued on next page . . .
2.3.1 Basic Usage