ENGLISH
7
MULTIFUNCTIONAL REMOTE CONTROL 2 in 1
The supplied remote control can be
programmed
to
also
manage
some
functions of the TV remote control (e.g.
volume management, switch-off, channel
change). To assign the TV functions to the
receiver's remote control, it is necessary to
use the
TV CONTROL
section at the top left
of the remote control, follow the procedure
below:
TV CONTROL.
TV remote control setting.
In the TV CONTROL section press the
SET
button for 3 seconds, the red LED will
increase in intensity. In the same section
press the key to set (e.g.
V+
), the red led
will flash.
Place the TV remote control in front of the
decoder remote control (so that the two
LEDs face each other) at a distance of
about 3 cm. On the TV remote control,
press and hold the button you want to set
(e.g.
VOL+
) until the red LED stays steady.
Press the
SET
button to save.
Set one key at a time.
