ENGLISH
11
2 - RADIO CHANNELS
As menu TV Channels.
3 - SCAN CHANNEL
On MAIN MENU, drive the cursor onto the tape of
Scan Channel
by pressing
▼▲ key.
Tivùsat Scan
To start the automatic search for tivusat channels.
Satellite Scan
In the window that appears after pressing
OK
, choose one or more satellites
by pressing
OK
: the chosen satellites will have the symbol
√
.
Press
YELLOW
to enter the settings column on the right of the screen:
Frequency, Polarization, Symbol Rate.
Selecting Frequency with ◄ ►
keys you can choose the desired TP. Consequently, Polarization and
Symbol rate will be set automatically.
Scan mode:
You can choose how the search should be done:
-Sat scan: Fast scan
-Blind scan: Detailed scan on every single signal being received.
-TP scan: Scan by Transponder
Local longitude
(to be set for motorized systems)
Local latitude
(to be set for motorized systems)
LNB Freq:
for the selection of LNB frequencies. For SCR and DCSS
settings press the
BLUE
button, enter the necessary data taking care to
activate SCR/DCSS status on ON.
22KHz Control
. Normally it is set to Auto.
LNB power.
Normally it is set to 13/18V.
Diseqc1.1 Port.
Choose the port.
Vers. Diseqc.
Use the ◄ ► keys to choose None if you do not use any
DISEqC. To set up a motorised antenna you must select
DISEqC 1.2
or
Usals
. With DISEqC 1.2 it is necessary to manually enter all parameters
for pointing, so you will need to know certain parameters to be entered in
the Diseqc Status item.
Selecting
Usals
instead the pointing will be automatic, just point the dish
towards the satellite.
Press the
GREEN
key and confirm the search by positioning on
OK
or
cancel it by positioning on Recall. Press
OK
to confirm your choice. After
Summary of Contents for RICD1232
Page 1: ......
Page 31: ...DIGIQUEST 30 ...
