DIGIQUEST
8
SYSTEM CONNECTION
WARNING:
w
hen making connections ALL the devices must be
disconnected from the electrical socket.
You can connect the decoder to the TV as follows:
1.
In a TV with HDMI connection, use an HDMI cable. Plug the cable into the
HDMI output of the receiver and the other end into the HDMI input of the TV
and if necessary select the desired source on the TV (e.g. HDMI1, HDMI2,
etc.). In this case, no audio connections are required because the HDMI
output provides stereo sound or Dolby digital.
NOTE: when the decoder is
connected to the TV via HDMI, you must select the correct input mode
(eg. HDMI 1 or 2 etc.) by pressing the SOURCE button on the remote
control of TV (depending on the brand, the button can also be
identified with INPUT, AV, AUX, ZERO, etc.), otherwise no image
appears.
2.
In a TV without HDMI connection but with SCART, connect the SCART
cable to the TV and the other end on the back of the receiver.
Connection to the dish
Connect the dish to the
SAT IN
input of the decoder.
Connecting the Power Supply
Only connect the supplied power supply to the
DC IN
port after all
connections have been completed.
Satellite
1
2
Summary of Contents for RICD1232
Page 1: ......
Page 31: ...DIGIQUEST 30 ...
