DIGIQUEST
26
Button 3
(Setup) key opens the window to set the scrolling of
image: Slide
Show duration
can be set to
OFF
not to activate it or
choose from
1
to
9
seconds the display time before the change.
Rip. Slide Show
: to activate the repetition (
On
) or not (
Off
).
Button 4
(MultiView) allows you to view up to 6 preview windows of
your images on your screen.
To start playback of a photo file, move to the file and press
OK
.
Press the
EXIT
button to exit.
NOTE:
the manufacturer cannot guarantee file playback
despite the extension being supported, depending on the
codec used, data bit rate and resolution.
HDD Information
Shows information about the connected USB memory.
DVR setting
- Timeshift:
Pause, Off
(disabled),
Auto
. If you select Pause, the
timeshift will be activated by pressing the II (pause) button. To
review the view from the interrupted point, press the
(PLAY)
button.
Off
disables the timeshift function.
Automatic
(rewind) the timeshift is always active, the vision of the
program does not stop, but it will be possible (after at least a few
minutes) to rewind to see from the point where the USB device has
been inserted or the channel has been changed.
NOTE
: if you are
using the REWIND function, you cannot change the channel. Press
the
■
(STOP) key and then change channel. To resume real time
viewing, press the
■
(STOP) key.
- Jump:
Adjusts the time shift on the timeshift bar from 30 seconds
to 30 minutes (
/
keys).
- Timeshift to Record:
When you start Timeshift you create a
temporary file: turning off or changing channel does not save the
file. You can also start a recording while watching timeshift. If you
select
Off
, during timeshift playback you can start recording from
the point you are watching. If you select
On
and start recording, all
timeshift already displayed will be saved and the recording will