DIGIQUEST
16
2 - Channel scan
With manual scanning, you can only search for one channel packet
at a time. To start this procedure, you need to know the channel
number corresponding to the frequency of the TV channel you want
to search for: each region has its own numbering.
- Choose whether channels are in the UHF or VHF band.
- Select the frequency of the channel to be searched using the
/
keys.
- Network search: to automatically search all the channels that
belong to the same Network.
Position on
Search
and press
OK
to start the search; to stop press
EXIT
.
3 - LCN
The Logical Channel Number function is set to On by default. It
allows to identify the channels by putting them in numerical order
(e.g. RAI 1 corresponds to key 1, etc.).
SYSTEM SETUP Menu
The
System Setup
menu allows you to choose different settings.
1 - Language
- Language:
this is the language used in the menu. To change use
the
/
keys.
- First audio:
to change it use the
/
keys. The availability of
languages depends on the broadcaster.
- Second audio:
to change use the
/
keys. The availability of
languages depends on the broadcaster.
- Subtitles language:
the availability of languages depends on the
broadcaster.
- Teletext:
you can set a language for teletext but it is only available
if the sender expects it.
- Subtitle:
to set the subtitle mode.
Off, Hard of Hearing, Normal
.
